How to put a shelf in a closet
Putting a shelf in a closet requires a bit of preparation. Before you begin installing the shelf, you’ll want to make sure the area is clear of any items that may be in your way. You’ll also want to measure the length and width of the closet in order to make sure the shelf is the right size. Once you have all the materials ready, it’s time to get started on installing the shelf.
Measure the closet space
Before beginning any closet organization project, it is important to get accurate measurements of the closet space. This way you can purchase shelves and other storage items that will fit perfectly in the closet area. Measure the width, length, and height of the available area keeping in mind that hanging clothing may need more room than just shelves.
Knowledge is power and preparation is key for a successful closet organization project. As you begin the task of organizing your closet, consider measuring and recording each section before moving onto step two–clearing out your wardrobe and accessories. Doing so will give you an accurate representation of how much usable space is actually available and help ensure you have enough storage containers or shelving units to make maximize your organizational efforts!
Decide on the shelf material
When it comes to choosing the right shelf material for your closet, there are a few factors to consider. Strength, affordability, and ease of installation are all key elements in this decision-making process. Here we explore some of the most popular shelf materials and their characteristics:
- Particleboard: Particleboard is a composite material composed of wood particles and resin binders. It is an affordable option that can be easily cut to fit various sizes and depths, but it is not as strong or durable as other options.
- Plywood: Plywood is often preferred for shelving, as it has greater strength than particleboard and more durability than solid wood planks. It also comes in many thicknesses and can be pre-cut for easy assembly. However, plywood may require pre-drilling before assembly.
- Metal Shelving: Metal shelves are another great choice for closet organization because they are strong, lightweight and easy to install compared to other shelf materials. Steel shelves offer superior weight capacity compared to other metal shelving solutions, but some may find them unsightly unless finished with paint or powder coating.
- Wire Shelving: Finally, wire shelving systems offer convenience as individuals can adjust the height of the shelves without needing tools or hardware for installation. Wire shelves typically come in a variety of sizes ranging from 12” by 12” units up to 48” by 24” units at retail stores. They also come with increased weight-bearing capacities allowing them to hold significant storage weight while still being affordable and easy to install via adjustable clips on walls or side panels within the closet frame.
Purchase the shelf
Before you start your shelf installation project, it is important to gather all the necessary materials. Begin by measuring the length of the shelves that you need and the width of the closet. With these measurements in hand, head off to a local store or shop online for your desired shelf and materials.
Most shelves come with pre-drilled mounting holes for easy installation, but you may want to check what mounting hardware comes with them beforehand or purchase additional fasteners from the store or online depending on how and where you plan to mount them in your closet. For example, if your shelf will be mounted into studs in the wall, you’ll need noticeably sturdier and more precise fasteners than if you are attaching it directly into drywall. Consider using lag screws with washers as they will provide a secure fit when attached into a stud or molly bolts when installing into solid drywall.
Once you have measured and purchased everything that you need for your project including tools, use painter’s tape to mark out where each wall panel will go then assemble your shelves following manufacturer instructions. After assembly is complete, carefully mount the shelves onto wall studs or molly bolts (or both) and make sure that they are properly secured before loading them with items or books!
Installing the Shelf
Installing a shelf in a closet requires careful planning and the right tools, but if done right, it can provide a convenient place to store items and help to better organize the closet.
In this section, we’ll take you through the steps to ensure your shelf is securely installed and how to make the process as easy as possible:
- Step 1: Measure the closet and decide where to install the shelf.
- Step 2: Gather the necessary tools and materials.
- Step 3: Cut the shelf boards to the desired length.
- Step 4: Secure the shelf boards to the wall.
- Step 5: Install the shelf supports.
- Step 6: Test the shelf for stability.
Mark the location of the shelf
Before you start to install a shelf in your closet space, you need to plan for the best position of the shelf that works with your items. To mark the location of the shelf, measure out from the back wall and mark with a pencil where you would want it installed. A tip is to always measure twice and mark once so that you don’t end up drilling into something behind the wall. As you can always make adjustments while constructing, measuring out at least an inch away from either side of your closet walls can give some leeway when needed.
Once satisfied with the measurements, make a pencil line across the desired area on both sides of the wall to indicate where your shelves will be installed.
Attach the shelf to the wall
Installing the shelf in your closet is a great way to make the most of limited space. By attaching the shelf to the wall and using different shelving heights, you can easily turn any closet into a neat, organized storage system. Before beginning this project, make sure you have all of your tools assembled and ready to use.
First, mark off where you want the shelf to be placed by making a small line at either end with a pencil on the wall of the closet. Once you have determined where it will go, use a level to ensure it is even from side to side. If one end happens to be higher than the other slightly, adjust as needed until it is straight across.
Next, measure out 16” intervals for wall anchors down from each side of the shelf in order to secure it with screws properly and avoid water damage or other structural damage done over time due to movement or expansion in different climates and conditions. Once these boxes are marked off on each side simultaneously along the entire length that needs to be secured with anchors then locate each pre-drilled hole where you’ll secure those panels firmly enough for them not move or become unattached due incorrect attachments once everything has been hung up after installation is finished.
At this point, your next step is to take some drywall anchors and carefully insert them into each marked hole created along both sides of your shelf measurements previously taken earlier during preparation for installation so that once screws have been fastened interlocking them into place as well as possible creating extra strength if ever any applied force such as weight added onto shelves were ever enough cause it bend in wrong directions or become unattached entirely eventually over time loose enough create instability where shelves had originally been installed firmly when attached correctly earlier which these details should eliminates chance happening altogether once installation has been completed properly without fail afterwards whenever securing panels tightly against walls entirely without fail afterwards should no problems occur mentioning again earlier!
Secure the shelf with screws
Secure the shelf to the wall studs, using a power drill and screws. Look for a stud by using either an electronic stud finder or by tapping lightly with a hammer along the edge of the wall where you plan to put your shelf until you hear something different from wallboard. Once you have identified where your wall studs are, mark them with a pencil so that you know exactly where to drill.
You will want to use at least two screws per wall stud in order to make sure that your shelf is securely mounted. It’s also important to make sure that the screws are long enough so that they’ll penetrate the full depth of the wood in your closet shelf, but not long enough so that they protrude on the other side of it.
Finishing Touches
Putting shelves into a closet can be a great way to store items and keep clutter to a minimum. By taking the time to properly install a shelf, you will ensure that it has the strength and stability to hold all the items you need.
In this article we will cover the finishing touches needed to get your shelf properly installed and ready to use:
Add shelf supports
Once you have decided where to add the shelf, you will need to add supports for the shelf. Shelf supports are usually metal bracket-like structures that are secured to top and bottom sections of the closet wall in which the shelf is located.
If you plan on including a shelf in your closet installation project, you will need to measure and cut shelves accordingly and install them using appropriate mounting hardware and wall anchors if needed. For lighter weight items such as clothing accessories, it is often sufficient to use simple wood screws or nails, with spacers between them so that the shelf can slide in without risk of damage. For heavier items such as books or shoe boxes, it is advised to use shelving brackets for a more secure installation.
Once your shelf has been installed, use decorative hooks or other accents to finish off your closet shelves and store your belongings safely and securely.
Install the shelf brackets
After you have cut the shelf board to size, you’ll need to install the shelf brackets on either side of the closet. Make sure that the brackets are correctly placed so that they will be able to bear the weight of any items you will store on the shelf. Included in your shelving kit should be screws to attach each bracket in its place – make sure these are fastened securely and tightened with a screwdriver or drill.
If mounting onto drywall, use wall anchors or toggle bolts so that your shelves can properly support heavier items. If mounting into wood, use wood screws and make sure they completely penetrate through and out of both sides of each bracket as added support. Once all brackets have been installed, simply slide your finished shelf into place and voila! You now have a newly organized closet with a sturdy new shelf to add storage space.
Secure the shelf brackets with screws
Once your shelf brackets are in the desired position, it’s time to secure them with screws. The boards should fit perfectly on edge if the shelving unit is of good quality. To make sure that the mounting bracket is fastened securely to the wall, drill pilot holes through the holes in the bracket and into your wall studs.
When you’re ready to insert screws into each hole, use an appropriate power tool and always wear safety gear (such as eye protection). Make sure to use an appropriately sized screwdriver bit that can fit firmly into each provided hole and turn it slowly until it creates a flush surface with your wall. Once all screws are tight enough, you can ensure that your shelf will be securely held in place for years to come.
Final Steps
Once you have all the material and tools you need to put a shelf in a closet, you’re ready for the final steps. This section will cover all the steps you need to take to complete this project and make sure it’s secure. With the right instruction and effort, you can have your shelf installed in no time.
- Measure the closet and mark the desired shelf height.
- Cut the shelf boards and sand the edges.
- Attach the shelf boards to the wall.
- Secure the shelf boards with screws.
- Add the shelf brackets and secure with screws.
- Finish the shelf with paint or stain.
Place the shelf on the brackets
Once the closet shelf brackets are set in place, position your wooden shelf onto the brackets. For added support, you may wish to attach the shelf to the wall or add additional supports as indicated in your project’s installation instructions.
Make sure that all of the screws are secured tightly and evenly. When everything is fastened properly, take a few steps back to assess the stability of your shelf and make any adjustments necessary.
Finally, finish up by adding any additional accessories or decorative accents that you desire.
Add decorative accents
Once you’ve secured the brackets to the wall, you can now add decorative accents such as trim moulding or finish nails to give your shelf a polished look. If desired, use a wider trim moulding around larger shelves and make sure to keep the nail heads just below the finish line in order to avoid unevenness along the shelf’s top edge. Install moulding across or around all exposed sides of the shelf that connect with the wall and trim any gaps between it and your installed shelf.
Once your finishing touches are finished, your closet organization project is complete!
Enjoy your new shelf!
Once your shelf is mounted and secured the next step is to enjoy it! Start by adding the decorative pieces that you chose to decorate your space. These items can include baskets, lamps, decorations and other items that allow your shelves to be whatever you imagine them to be.
You may also consider adding organizational pieces like floating shelves or corner shelves. If you are using open shelving on the sides of a closet consider attaching extra brackets underneath for even more storage options. Another great way of using a shelf in a closet is to mount several rungs all along one side, making it easy to hang cute hangers and organize dresses and jackets.
Once your new shelf system is installed take some time out of each day or week to organize it properly so that everything looks neat and tidy. Consider creating labels for all the different sections so that when you are putting something away or retrieving an item you know where it should go. For example: seasonal clothes or maybe hats etc should just have their own spaces. Also make sure everything else has its place as well including books, documents, and any other items stored in closets as these can become cluttered quickly if not kept organized properly.
No matter what type of shelf system you decide on, planning ahead will help tremendously when organizing your closet. Spend time looking at sample images online so you can get an idea of what kind of look would best suit your need without consuming too much space within the closet itself. With a little bit of planning and creativity any closet space can become highly functional with enough storage for all types of items!
More Stories
The Significance of Floor Directional Signage
Incorporating Roulette-Inspired Elements into Your Home
How Do Custom Area Rugs Add the Finishing Touch to a Room’s Redesign? Improve Your Space with Style